1, supply voltage: DC 5-12V 2, the output type: voltage output 3, the output number of phases: A, B, Z phase 4, Resolution (pulses / rotation) range of choice: 10P / R, 30 P / R, 60 P / R, 100 P / R, 180 P / R, 200 P / R, 300 P / R, 360 P / R, 400 P / R, 500 P / R.
Power supply voltage
5 VDC -5% to 12 VDC +10% (ripple (p-p): 5% Max.)
30mA DC Max.
Current: approx. 9 A Time: approx. 0.3 ms
Resolution (Single turn type)
Control output (Output type)
NPN voltage output
Control output (Output resistance)
2 k OHM
Control output (Load current)
20 mA Max.
Control output (Residual voltage)
(DC) 0.4 V Max. (load current:at 20mA Max.)
Starting positional point
Max. response frequency
Output duty factor
50 -25% to +25%
Rise and fall times of output
Rise time of output: 1 us Max. (Cable length: 500mm, sink current: 10mA) Fall time of output: 1 us Max. (Cable length: 500mm, sink current: 10mA)
Room temperature: 1 mN.m Max.
Moment of inertia
Radial: 10 N Thrust: 5 N
Max. permissible rotation
Mechanical life expectancy
100 million rotations Min.
Operating: -10 to 55 CEL Storage: -25 to 80 CEL (with no icing or condensation)
Operating: 35 to 85 %RH Storage: 35 to 85 %RH (with no condensation)
20 M OHM Min. at 500 VDC between charged parts and the case
500 VAC at 50/60 Hz for 1 minute between charged parts and the case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection
Applicable standard (EC Directive (EMC Directive))
EMI: EN50081-2 Emission Enclosure: EN55011 Group 1 classA Emission AC mains: EN55011 Group 1 classA Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 CE marking: Equipped